JENCO 6308CT Conductivity, TDS, Temperature In-line Analyzer

Harga :

CALL

Merk :

JENCO

Pengiriman :

1 hari sejak pembayaran

Lokasi :

Jawa Barat - Bekasi

Dilihat :

146 Kali

Update Terakhir :

09-02-2016 11:55

Dapatkan Spesifikasi Harga JENCO 6308CT Conductivity, TDS, Temperature In-line Analyzer Produk Terbaik dari ANDALAN PRIMA SEJAHTERA LABORATORY EQUIPMENT, CHEMICAL, GLASWARE, MEASURING AND TEST

Detail Produk

6308CT

Description

Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.

Bumpless calibration
CE approved
RS-485 output
Programmable relays for conductivity
Reversible and isolated 4 to 20ma output
Programmable relay for temperature
Conductivity/temp.measurement & control
Simultaneous analysis and display for measurement and controls
User programmable reference temperature temperature coefficient
Selectable 2-wire or 4-wire cells for long cable length & wide measurement range

Specifications

	RANGE	RESOLUTION	ACCURACY
Cond.	0 uS to 5.0 mS	0.01 uS to 0.1 mS	0.5% ± 1 LSD
TDS	0 ppm to 150.0 ppt	0.01 ppm to 0.1 ppt	0.5 % ± 1 LSD
Temp.	-10.0 to 120°C	0.1 °C	± 0.1 °C

Conductivity
- Reference temperature: 1.5 °C to 25.0 °C
- Temperature coefficient: 0.0 % to 40.0%
- Basic cell constant: 0.01,1 and 10.0
- Cell constant range: ±30% of basic cell constant
Output Relays
- Output relays numbers: Two programmable high or low relays for conductivity
- Control type: On/off
- Relay output (resistive load only): 5amps at 115 VAC, 2.5 amps at 230 VAC
- Relay set point hysteresis: User programmable
Current Output
- Current output: Isolated 4 to 20 mA
- Range: Selectable zero, & span
- Accuracy: ±0.02mA
- Isolated voltage: 500 VDC
- Maximum load: 500 ohms
General
- ATC sensor: Thermistor 10kiloohms at 25 °C
- Security protection: 4digit password
- Keypad: Audio feedback
- Communication: RS-485
- Display: Graphic LCD w/backlight
- Power source: 115/230 VAC, 50/60hz
- Dimensions: 1/4 DIN, depth 148 mm
- Weight: 950 gm

ANDALAN PRIMA SEJAHTERA

JENCO 6308CT Conductivity, TDS, Temperature In-line Analyzer

Detail Produk

6308CT

Description

Specifications

Conductivity

Output Relays

Current Output

General

Permintaan Penawaran

Kategori Produk

Link