- Simultaneous analysis of up to three parameters
- Simple upgrading with additional measuring parameters
- High operational safety
Modular system: An analyzer can be individually equipped with up to 3 analysis modules. Also, you can upgrade later with more parameters thanks to the "plug and measure" principle, without any problem.
Analysis modules: You can select freely from the parameters PO4, Ptot, NO3, NO2, and NH4. The wet chemical detection is done according to standard measuring methods. You will find more information on the respective analysis modules in the section "Variations".
Variations
| Model | Description | Order no. | ||
|---|---|---|---|---|
| TresCon basic meter with up to 3 analysis modules to set up (Caution: Total phosphorus requires 2 module slots because of digestion unit!) | ||||
| TresCon® without modules | TresCon basic meter without analysis module 100...120 /200...240 V AC (AutoSelect); 47...63 Hz | 820042 | ||
| OA 110 | Separate analysis module for ammonium nitrogen | 820008 | ||
| ON 210 | Separate TresCon®analysis module for online nitrate measurement | 820007 | ||
| OS 210 | Separate TresCon®analysis module for online nitrate/SAC measurement, | 820010 | ||
| ON 510 | Separate TresCon®analysis module for online nitrite measurement | 820009 | ||
| OP 210/ MB 1 | Separate TresCon®analysis module MB 1: 0.05 - 3.00 mg/l PO4-P | 820004 | ||
| OP 210/ MB 2 | Separate TresCon® analysis module MB 2: 0.1 - 10.0 mg/l PO4-P | 820005 | ||
| OP 210/ MB 3 | Separate TresCon® analysis module MB 3: 0.1 - 25.0 mg/l PO4-P | 820006 | ||
| OP 510 | Separate TresCon® analysis module for online total phosphorus measurement | 820011 | ||