JENCO 3676 pH, ORP In-line Controller

Harga :

CALL

Merk :

JENCO

Pengiriman :

1 hari sejak pembayaran

Lokasi :

Jawa Barat - Bekasi

Dilihat :

83 Kali

Update Terakhir :

09-02-2016 11:02

Detail Produk

3676

Description

1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large bright red LED display. Connectors are a BNC input and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or temp. simulation resistor. Power 115/230V AC.

Isolated 4 to 20 mA output
Dual on/off relays
Large led display
ATC
115VAC /230VAC operations
Compact 1/4 DIN case
Low power solid state design
Front panel output current span adjustable control
Front panel acid/base influent select switch
Front panel high/low relay format select switch

Specifications

	RANGE	RESOLUTION	ACCURACY
pH	0 to 14.00	0.01	± 0.01
ORP	-1999 to 1999 mV	1	± 0.1%

Controller Input Range
- Current output pH/ORP: 0.00~14.00ph / -1400 ~ 1400 mV
- Current output pH/ORP: 0.00~14.00ph / -1999 ~ 1999 mV
Outputs
- Relays output (max.): 5amp. at 115VAC, 2.5 amp. at 230 VAC,resistive lo
- Relay hysteresis pH/ORP: ±0.1ph/±10 mV
- Isolated 4~20mA output range: Over imput span
- Accuracy: 0.1 % of span
- Isolation voltage: 500VDC max.
- Load resistance: 500 ohm max.
General
- Input impedance: Greater than 10exp(12) ohms
- Temperature compensation: Auto 0 to 100°C
- Readout: 12.7 mm high LCD
- Operating temperature: 0 to 40 °C
- Power source: 115/230 VAC ±15%,50/60hz
- Dimensions: 96mm x 96mm x 119.3mm
- Weight: 0.77 kg

ANDALAN PRIMA SEJAHTERA

JENCO 3676 pH, ORP In-line Controller

Detail Produk

3676

Description

Specifications

Controller Input Range

Outputs

General

Permintaan Penawaran

Kategori Produk

Link